Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 52
Port Management > SFP Port Info
This page displays general SFP information and monitoring information.
Connector Type: Displays the external optical or electrical cable connector provided as the media interface.
Fiber Type: Displays the fiber channel transmission media.
Tx Central Wavelength: Displays the nominal transmitter output wavelength in nanometers (nm).
Bit Rate: Displays the nominal bit rate of the transceiver.
Vendor OUI: Displays the vendor IEEE company ID.
Vendor Name: Displays the vendor name.
Vendor P/N: Displays the vendor part number or product name.
Vendor Revision: Displays the vendor’s product revision.
Vendor Serial Number: Displays the vendor serial number for the transceiver.
Date Code: Displays the vendor's manufacturing date code.
Temperature: Displays the internally measured transceiver temperature. Temperature accuracy is vendor
specific but must be better than 3 degrees Celsius over specified operating temperature and voltage.
Vcc: Displays the internally measured transceiver supply voltage. Accuracy is vendor specific but must be better
than 3 percent of the manufacturer's nominal value over specified operating temperature and voltage. Note that in
some transceivers, transmitter supply voltage and receiver supply voltage are isolated. In that case, only one
supply is monitored. Refer to the device specification for more detail.
To Next Page
Loading...
Need help?
General
