Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 123
QoS Egress Port PCP Remarking
Click a linked port number to display the Egress Port PCP Remarking for the selected port. The Egress Port PCP
Remarking for a specific port are configured on this page.
Port: The port number for which the configuration below applies.
PCP Remarking Mode: Controls the PCP remarking mode for this port.
Keep: Use classified PCP/DEI values.
Specific: Use specific PCP/DEI values.
Mapped: Use mapped versions of CoS and DPL. DP Level 1 means 1 or higher.
PCP/DEI Configuration (displays only if “Specific” Mode is selected):
Specific PCP: At the dropdown select 0-7. The default is 0.
Specific DEI: At the dropdown select 0 or 1. The default is 0.
(Queue Priority, DP level) to (PCP, DEI) Mapping (displays only if “Mapped” Mode is selected):
Queue Priority: Displays two rows for each Queue Priority (0-7).
DP level: DP Level 1 means 1 or higher.
PCP: At the dropdown select 0-7.
DEI: At the dropdown select 0 or 1.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English