EasyManuals Logo

Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040 L3 Series
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 199
DHCP > Server > Status
This page displays DHCP server status.
Interfaces
VLAN: Displays the VLAN ID of the entry.
Type: Displays the server type:
Network: to service more than one DHCP client.
Host: for a specific DHCP client identified by client identifier or hardware address.
Start IP and End IP: Displays the starting IP address and the ending IP address.
Lease Time: Displays the configured lease time.
Subnet Mask: Displays the configured subnet mask of the DHCP address.
Default Router: Displays the destination IP network or host address of this route.
DNS Server: Displays the configured DNS server IP address.
IP Binding Status
IP: The leased IP address.
VLAN: The VLAN ID of the entry.
State: The current state of the IP address.
MAC: The hardware address of the device.
Expiration: The lease time left before it expires.
Buttons
Auto-refresh : Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.

Table of Contents

Other manuals for Lantronix SISPM1040 L3 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantronix SISPM1040 L3 Series and is the answer not in the manual?

Lantronix SISPM1040 L3 Series Specifications

General IconGeneral
BrandLantronix
ModelSISPM1040 L3 Series
CategorySwitch
LanguageEnglish

Related product manuals