Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 346
Router
The router module lets you configure key-chain and access list parameters.
The IP Address > Advanced Settings page has a Mode dropdown to select Host or Router mode. It must be set to
Router to be able to use the Router function.
Router > Key-Chain
This page lets you set router key chain name table parameters.
A key chain is a set of keys used in succession; each has a limited lifetime. Change the keys frequently to reduce
the chance of an intruder guessing a key. A key is not used during inactive time (when not activated). If a time
period occurs when no key is activated, no neighbor authentication can occur, and routing updates will fail.
Delete: Check to delete the entry. It will be deleted during the next save.
Key Chain Name: The name of the key-chain entry. The valid name string length is 1-31 characters and allows
all printable characters excluding the space character.
Key ID: Click the icon to edit the key. Key ID must be an integer value of 1 - 255. The minimum length is 1.
Buttons
Add New Entry: Click to add a new entry to the table.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
