Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 180
Multicast Filtering Profile
Multicast Filtering Profile > Filtering Profile Table
This page provides IPMC Profile related configurations.
The IPMC profile is used to deploy the access control on IP multicast streams. You can create a maximum of 64
Profiles and a maximum of 128 corresponding Rules for each profile.
Multicast Filtering Profile Mode: Set to on (to enable) or off (to disable) Multicast Filtering Profile globally.
The system starts filtering based on profile settings only when this global Profile Mode is on (enabled).
Delete: Check to delete the entry. The designated entry will be deleted during the next save.
Profile Name: The name used for indexing the profile table. Each entry has the unique name which is composed
of at maximum 16 alphabetic and numeric characters. At least one alphabet must be present.
Profile Description: Additional description, which is composed of at maximum 64 alphabetic and numeric
characters, about the profile. No blank or space characters are permitted as part of description. Use "_" or "-" to
separate the description sentence.
Rule: When the profile is created, click the Edit button to enter the rule setting page of the designated profile.
Summary about the designated profile will be shown by clicking the view button. You can edit or preview the rules
of the designated profile by using these buttons:
Preview: Preview the rules associated with the designated profile (see below).
Edit: Adjust the rules associated with the designated profile (see below).
Buttons
Add New Filtering Profile: Click to add new IPMC filtering profile. Specify the name and configure the new entry.
Click "Apply".
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.