Lantronix SISPM1040 L3 Series - VLAN Management > Stream > MAC Matching

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 99
VLAN Management > Stream > MAC Matching
Does not currently display in the Web UI. A stream can be defined as all traffic that match a certain key which
may contain either destination MAC, source MAC, destination IP address, or source IP address. The matching will
not use all fields in the key.
This page allows you to configure MAC/IP matching for each port. Each port can be configured to use either
(source MAC/source IP address) or (destination MAC/destination IP address).
Port: Port number of the switch.
VCL MAC Matching: Specify the MAC matching to be used. Possible values are:
Source MAC: Use source MAC/source IP address for matching (default).
Destination MAC: Use Destination MAC/Destination IP address for matching.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.