Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 279
SNMP > History > Configuration
Configure RMON History table on this page. The entry index key is ID.
Delete: Check to delete the entry. It will be deleted during the next save.
ID: Indicates the index of the entry. The range is from 1 to 65535.
Data Source: Indicates the port ID which wants to be monitored. If in stacking switch, the value must add
1000*(switch ID-1), for example, if the port is switch 3 port 5, the value is 2005.
Interval: Indicates the interval in seconds for sampling the history statistics data. The range is 1- 3600 seconds,
and the default value is 1800 seconds.
Buckets: Indicates the maximum data entries associated this History control entry stored in RMON. The valid
range is 1 – 3600 buckets, and the default value is 50 buckets.
Buckets Granted: The number of data to be saved in the RMON.
Buttons
Add New Entry: Click to add a new RMON history entry.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
