Lantronix SISPM1040 L3 Series - OSPFv3 > Detail Database > Summary

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 407
OSPFv3 > Detail Database > Summary
This page displays the OSPF6 LSA Summary link state database information table.
Set the Start from Area ID, Link State Type, Link State ID, Advertising Router, and entries per page controls.
Area ID: The OSPF6 area ID of the link state advertisement
Link State Type: The type of the link state advertisement.
Link State ID: The OSPF6 link state ID. It identifies the piece of the routing domain that is being described by the
LSA.
Advertising Router: The advertising router ID which originated the LSA.
Age (in seconds): The time in seconds since the LSA was originated.
Options:
Sequence: The LS sequence number of the LSA.
Checksum: The checksum of the LSA contents.
Length: The Length in bytes of the LSA.
Prefix: IPv6 network address.
Prefix Length: IPv6 network mask length.
Metric: User specified metric for this summary route. The field is significant only when the link state type is
'External/NSSA External Link State' (Type 5, 7).
Example: