Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 395
OSPFv3 > Status > Neighbor Status
This page displays the OSPF6 IPv6 neighbor status table.
Neighbor ID: The Neighbor ID.
Priority: The priority of OSPF6 neighbor. It indicates the priority of the neighbor router. This item is used when
selecting the DR for the network. The router with the highest priority becomes the DR.
State: The state of OSPF6 neighbor. It indicates the functional state of the neighbor router.
Dead Time: The Dead timer indicates the amount of time remaining that the router waits to receive an OSPF6
hello packet from the neighbor before declaring the neighbor down.
Interface Address: The IP address.
Interface: The network interface.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
To Next Page
Loading...
Need help?
General
