Lantronix SISPM1040 L3 Series - Delete Configuration File; Maintenance > Restart Device

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 444
Delete Configuration File
It is possible to delete any of the writable files stored in flash, including startup-config. If this is done and the
switch is rebooted without a prior Save operation, this effectively resets the switch to default configuration.
1. Select a configuration file to delete.
2. Click the Delete Configuration File button.
3. At the prompt “Are you sure ...?” click the OK button.
4. The message “<filename> successfully deleted” displays.
Maintenance > Restart Device
You can restart the switch on this page. The prompt “Are you sure you want to perform a Restart?” displays:
Yes: Click to restart device.
No: Click to return to the System > System Information page without restarting.