Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 367
OSPF > Status
This section provides various OSPF statuses.
OSPF > Status > Global Status
This page displays the OSPF router status table which provides OSPF router status information.
Router ID: OSPF router ID.
SPF Delay: Delay time (in milliseconds) of SPF calculations.
SPF Hold Time: Minimum hold time (in milliseconds) between consecutive SPF calculations.
SPF Max. Wait Time: Maximum wait time (in milliseconds) between consecutive SPF calculations.
Last Executed SPF Time Stamp: Time (in milliseconds) that has passed between the start of the SPF algorithm
execution and the current time.
Min. LSA Interval: Minimum interval (in seconds) between link-state advertisements.
Min. LSA Arrival: Maximum arrival time (in milliseconds) of link-state advertisements.
External LSA Count: Number of external link-state advertisements.
External LSA Checksum: Number of external link-state checksum.
Attached Area Count: Number of areas attached for the router.
Buttons
Clear OSPF Status: Click to reset the current OSPF process.
Auto-refresh : Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
To Next Page
Loading...
Need help?
General
