Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 122
QoS > Port PCP Remarking
This page displays QoS Egress Port PCP Remarking settings for all switch ports.
Port: The logical port for the settings contained in the same row. Click a linked port number to configure PCP
remarking (see below).
Mode: Shows the PCP remarking mode for this port.
Keep: Use classified PCP/DEI values (default).
Specific: Use default PCP/DEI values.
Mapped: Use mapped versions of CoS and DPL.
To Next Page
Loading...
Need help?
General
