Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 118
QoS > Port Schedulers
This page lets you set QoS Egress Port Scheduler parameters for all switch ports.
Port: The logical port for the settings contained in the same row. Click on the port number in order to configure
the schedulers (see below).
Mode: Controls which queues are scheduled as Strict Priority and which are scheduled as Weighted on this
switch port.
Weight (Q0-Q7): Set the weight for this queue in the range 1-100. This parameter is only active if Scheduler
“Mode" is set to "Weighted".
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
