Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 440
Maintenance
This section provides maintenance configuration functions (save, backup, restore, activate, and
delete) restart device, reset to factory defaults, and firmware upgrade and selection functions.
Maintenance > Configuration
The switch stores its configuration in a number of text files in CLI format. The files are either
virtual (RAM-based) or stored in flash on the switch.
The available files are:
• running-config: A virtual file that represents the currently active configuration on the switch. This file is
volatile.
• startup-config: The startup configuration for the switch, read at boot time. If this file doesn't exist at boot
time, the switch will start up in default configuration.
• default-config: A read-only file with vendor-specific configuration. This file is read when the system is
restored to default settings.
• Up to 99 other files, typically used for configuration backups or alternative configurations.
Save Startup-config
This page lets you copy running-config to startup-config, thereby ensuring that the currently active configuration
will be used at the next reboot.
File Name: Tic a radio button to select a filename.
Save Configuration: Click the button to start the save process.
When done a message displays: save running config to startup-config successfully. Click the OK button to clear
the message.
To Next Page
Loading...
