Lantronix SISPM1040 L3 Series - OSPFv3 > Configuration > Passive Interface

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 389
OSPFv3 > Configuration > Passive Interface
This page displays the OSPF6 router passive interface configuration table.
Interface: Interface identification. At the dropdown select Enable.
Area ID: The OSPF6 interface Area ID. Only valid if Router ID is set to Specific.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.