EasyManuals Logo

Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040 L3 Series
502 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #190 background imageLoading...
Page #190 background image
Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 190
DHCP > DHCPv6 > Snooping > Table
This page displays the content of the current DHCPv6 Snooping Table. This table display the currently known
DHCPv6 clients and their assigned addresses.
Client DUID: The DHCP Unique Identifier (DUID) for the client. DHCPv6 uses this value to uniquely identify a
client host instead of just using the MAC address of one of its interface ports (as DHCPv4 does).
MAC Address: The MAC address for the client interface port that sent the DHCPv6 message.
Ingress Port: The local port on the snooping switch where client messages are received.
IAID: Each client may contain multiple interfaces and may request addresses for each of these in the same
DHCPv6 message. The Identity Association ID (IAID) value uniquely identifies the interface in the scope of the
client.
VLAN ID: The VLAN ID which is used by the client messages.
Assigned Address: The address assigned to the interface identified by the IAID value.
Lease Time: The lease time associated with the assigned address in seconds.
DHCP Server Address: The IPv6 address of the DHCP server which assigned the address to the client.
Buttons:
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to manually refresh the page immediately.

Table of Contents

Other manuals for Lantronix SISPM1040 L3 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantronix SISPM1040 L3 Series and is the answer not in the manual?

Lantronix SISPM1040 L3 Series Specifications

General IconGeneral
BrandLantronix
ModelSISPM1040 L3 Series
CategorySwitch
LanguageEnglish

Related product manuals