Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 418
RIP > Configuration > Offset-List
This page displays the RIP offset-list configuration table.
Delete: Check to delete the entry. It will be deleted during the next save.
VLAN ID: The VLAN interface which the offset list applies to. The range is 0 - 4095. 0 means that the offset list
applies to all interfaces.
Direction: The direction to add the offset to routing metric update.
In: Apply to the inbound direction (default).
Out: Apply to the outbound direction.
Access List Name: Access-list name. The valid name string length is 1-31 characters and allows all printable
characters excluding the space character.
Offset Metric: The offset to incoming or outgoing routing metric. The allowed range is 0-16.
Buttons
Add New Entry: Click to add new entry to the table.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Example:

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English