Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 200
Security
This section provides security in terms of management, 802.1X, IP Source Guard,
IPv6 Source Guard, ARP inspection, Port security, RADIUS, and TACACS+.
Security > Management > Account
This page displays an overview of current accounts, and lets you add new, and edit and
delete existing users.
User Name: The name identifying the user. This is also a link to Add User and Edit User (see below).
Privilege Level: The privilege level of the account. The allowed range is 0-15. If the privilege level value is 15, it
can access all groups, i.e., that is granted the fully control of the device. But other values need to refer to each
group privilege level. User's privilege should be same or greater than the group privilege level to have the access
of that group. By default, most groups privilege level 5 has read-only access and privilege level 10 has read-write
access. And the system maintenance (software upload, factory defaults, etc.) need user privilege level 15.
Generally, privilege level 15 can be used for an administrator account, privilege level 10 for a standard user
account, and privilege level 5 for a guest account.
Buttons
Add New User: Click to add a new user. The maximum numbers of users is 20.

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English