Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 357
OSPF > Configuration > Stub Area
This page lets you set OSPF stub area parameters. The configuration is used to reduce the link-state database
size and therefore reduce memory and CPU requirements by forbidding some LSAs.
Delete: Check to delete the entry. It will be deleted during the next save.
Area ID: The OSPF area ID.
Stub Type: The OSPF stub configured type.
Stub Area: Configure the area as stub area.
NSSA: Configure the area as not-so-stubby area (NSSA).
No Summary: The value is true to configure the inter-area routes do not inject into this stub area.
Translator Role: The OSPF NSSA translator role.
Candidate: this NSSA-ABR router will participate in the translator election.
Never: this NSSA-ABR router never translates.
Always: this NSSA-ABR router always translates.
Buttons
Add New Entry: Click to add new entry.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Messages:
JSON RPC Error. (Backbone can not be configured as stub area)
Example:
To Next Page
Loading...
Need help?
General
