Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 284
SNMP > Event > Configuration
Configure RMON Event parameters on this page. The entry index key is ID.
Delete: Check to delete the entry. It will be deleted during the next save.
ID: Indicates the index of the entry. The range is 1 - 65535.
Desc: Indicates this event, the string length is 0 - 127, and the default is a null string.
Type: Indicates the notification of the event, the possible types are:
none: No SNMP log is created and no SNMP trap is sent.
log: Create SNMP log entry when the event is triggered.
snmptrap: Send SNMP trap when the event is triggered.
logandtrap: Create SNMP log entry and sent SNMP trap when the event is triggered.
Event Last Time: Indicates the value of sysUpTime at the time this event entry last generated an event.
Buttons
Add New Entry: Click to add a new RMON event entry.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.