Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 396
OSPFv3 > Status > Interface Status
This page displays the OSPF6 interface status table.
Interface: Interface identification (e.g., VLAN 1).
Interface Address: IPv6 network address.
Area ID: The OSPF6 area ID in the format 1.2.3.4.
Router ID: The OSPF6 router ID in the format 0.0.0.1
State: The state of the link (e.g., DR).
DR ID: The router ID of DR.
BDR ID: The router ID of BDR.
Pri: The OSPF6 priority. It helps determine the DR and BDR on the network to which this interface is connected.
Cost: The cost of the interface.
Hello: Hello timer. A time interval that a router sends an OSPF6 hello packet.
Dead: Dead timer. Dead timer is a time interval to wait before declaring a neighbor dead. The unit of time is
seconds.
Retransmit: Retransmit timer. A time interval to wait before retransmitting a database description packet when it
has not been acknowledged.
Passive: Displays ‘true’ if the interface is a passive interface or ‘false’ if it not.
Transmit Delay: The estimated time in seconds to transmit a link-state update packet on the interface.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
To Next Page
Loading...
