Lantronix SISPM1040 L3 Series - Security > IP Source Guard > Static Table

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 221
Security > IP Source Guard > Static Table
This page shows the static IP Source Guard rules. The maximum number of rules is 112 per switch.
Delete: Check to delete the entry. It will be deleted during the next save.
Port: The logical port for the settings.
VLAN ID: The VLAN ID (VID) for the settings.
IP Address: Allowed Source IP address.
MAC address: Allowed Source MAC address.
Buttons
Add New Entry: Click to add a new entry to the Static IP Source Guard table.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.