Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 168
Basic Configuration
This page provides MLD Snooping related configuration.
Global Configuration
Snooping Enabled: Enable the Global MLD Snooping.
Unregistered IPMCv6 Flooding Enabled: Enable unregistered IPMCv6 traffic flooding. The flooding control
takes effect only when MLD Snooping is enabled. When MLD Snooping is disabled, unregistered IPMCv6 traffic
flooding is always active in spite of this setting.
MLD SSM Range: SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM
service model for the groups in the address range. Assign valid IPv6 multicast address as prefix with a prefix
length (from 8 to 128) for the range.
Leave Proxy Enabled: Enable MLD Leave Proxy. This feature can be used to avoid forwarding unnecessary
leave messages to the router side.
Proxy Enabled: Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and leave
messages to the router side.
To Next Page
Loading...
Need help?
General
