Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 286
CFM
Connectivity Fault Management (CFM) is a standard defined by IEEE802.1ag. It defines protocols and practices
for OAM (Operations, Administration, and Maintenance) and is largely identical with ITU-T Recommendation
Y.1731.
CFM > Global
Configure CFM Global Configuration parameters on this page.
Sender Id TLV: Choose whether and what to use as Sender ID TLVs in CCMs generated by this switch. Can be
overridden by Domain and Service level configuration. Can be None, Chassis, Manage, or ChassisManage.
Port Status TLV: Choose whether to send Port Status TLVs in CCMs generated by this switch. Can be
overridden by Domain and Service level configuration.
Enable: Send Port Status TLVs in CCMs generated by this switch.
Disable: Do not send Port Status TLVs in CCMs generated by this switch.
Interface Status TLV: Choose whether to send Interface Status TLVs in CCMs generated by this switch. Can be
overridden by Domain and Service level configuration.
Enable: Send Interface Status TLVs in CCMs generated by this switch.
Disable: Do not Send Interface Status TLVs in CCMs generated by this switch.
Organisation Specific TLV: Choose whether to send Organisation Specific TLVs in CCMs generated by this
switch. Can be overridden by Domain and Service level configuration.
Enable: Send Organisation Specific TLVs in CCMs generated by this switch.
Disable: Do not send Organisation Specific TLVs in CCMs generated by this switch.
To Next Page
Loading...
Need help?
General
