Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 339
Event Notification > email
This page lets you configure SMTP (Simple Mail Transfer Protocol). SMTP is the message-exchange standard for
the Internet. The switch is to be configured as a client of SMTP while the server is a remote device that will
receive messages from the switch that alarm events occurred.
Mail Server: The IP address or hostname of the mail server. IP address is expressed in dotted decimal notation.
This will be the device that sends out the mail for you
User Name: Specify the username on the mail server.
Password: Specify the password of the user on the mail server.
Sender: Specify the name of the sender of the alarm mail.
Return Path: Specify the sender email address of the alarm mail. This address will be the "from" address on the
email message.
Email Address # : Specify the email address of the receiver.
Buttons
Apply: Click to apply changes.
Reset: Click to undo any changes made locally and revert to previously saved values.

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English