Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 16
First Time Wizard
1. Change default password: enter a new password. It must contain at least 8 characters; at least 1 upper case,
1 lower case and 1 numeric character. New password should not be blank or default value. Enter the new
password again and click Next.
2. Set IP address: select “Obtain IP address via DHCP” or “Set IP address manually”. Enter an IP address,
Subnet mask, Default router, and DNS IP address, then click Next.
3. Set Date & Time: set Automatic date and time to | (on) or 0 (off). Enter a Server Address and select a Time
zone. Set date and time Manually if prompted and click Next.
4. Set Information: Set System contact, System name, and System location as desired and click Apply.
5. When the Login page displays, enter the new Username and Password, then click Login. The System
Information page displays as described below.
To Next Page
Loading...
