Lantronix SISPM1040 L3 Series - DSCP > DSCP Classification

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 126
DSCP Classification
This page allows you to configure the mapping of Queue Priority and DPL to DSCP value.
Queue Priority: The actual Class of Service (COS).
DSCP DP0: Select the classified DSCP value (0-63) for Drop Precedence Level 0.
DSCP DP1: Select the classified DSCP value (0-63) for Drop Precedence Level 1.
DSCP DP2: Select the classified DSCP value (0-63) for Drop Precedence Level 2.
DSCP DP3: Select the classified DSCP value (0-63) for Drop Precedence Level 3.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.