Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 283
SNMP > Alarm > Status
This page provides an overview of RMON Alarm entries. Each page shows up to 99 entries from the Alarm table,
default being 20, selected through the "entries per page" input field. When first visited, the web page will show the
first 20 entries from the beginning of the Alarm table. The first displayed will be the one with the lowest ID found in
the Alarm table.
The "Start from Control Index" lets you select the starting point in the Alarm table.
ID: Indicates the index of Alarm control entry.
Interval: Indicates the interval in seconds for sampling and comparing the rising and falling threshold.
Variable: Indicates the particular variable to be sampled
Sample Type: The method of sampling the selected variable and calculating the value to be compared against
the thresholds.
Value: The value of the statistic during the last sampling period.
Startup Alarm: The alarm that may be sent when this entry is first set to valid.
Rising Threshold: Rising threshold value.
Rising Index: Rising event index.
Falling Threshold: Falling threshold value.
Falling Index: Falling event index.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
First Entry: Updates the table starting from the first entry in the Alarm Table, i.e. the entry with the lowest ID.
Next Entry: Updates the table, starting with the entry after the last entry currently displayed.