Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 169
Port Related Configuration
Router Port: Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads
towards the Layer 3 multicast device or MLD querier. If an aggregation member port is selected as a router port,
the whole aggregation will act as a router port.
Fast Leave: Enable the fast leave on the port. The system will remove group record and stop forwarding data
upon receiving the leave message without sending last member query messages. It is recommended to enable
this feature only when a single MLDv1 host is connected to the specific port.
Throttling: Enable to limit the number of multicast groups to which a switch port can belong.
Filtering Profile: Select the profile for this port. Click to preview the page which list the rules associated with the
selected profile.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
