Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 233
A port can be Sticky-enabled whether Port Security is enabled on that interface. In that way, it is possible to add
sticky MAC addresses in terms of management before enabling Port Security. To do that, use the "Configuration
> Security > Port Security > MAC Addresses" page.
Sticky MAC (AKA, Persistent MAC learning) is a port security feature that causes an interface to retain
dynamically learned MAC addresses when the switch is restarted or if the interface goes down and is brought
back online.
Enabled: If the running config has sticky MAC addresses, then these MAC addresses are automatically
to be static MAC address on MAC table.
Disabled: Sticky MAC addresses are not enabled.
Clear: Click the button to clear the static MAC addresses added by the Sticky function.
Buttons
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Refresh: Click to refresh the page. Note that non-committed changes will be lost.
To Next Page
Loading...
Need help?
General
