Lantronix SISPM1040 L3 Series User Manual

Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 246
Other Info: This section contains information about the state of the server and the latest round-trip time.
Name
RFC4668 Name
Description
IP
Address
-
IP address and UDP port for the
authentication server in question.
State -
Shows the state of the server. It takes one of these values:
Disabled
: The selected server is disabled.
Not
Ready: The server is enabled, but IP communication is not yet up
and running.
Ready
: The server is enabled, IP communication is up and running, and
the RADIUS module is ready to accept access attempts.
Dead
(X seconds left): Access attempts were made to this server, but it
did not reply within the configured timeout. The server has temporarily
been disa
bled but will get re-enabled when the dead-time expires. The
number of seconds left before this occurs is displayed in parentheses.
This state is only reachable when more than one server is enabled.
Round-
Trip
Time
radiusAuthClientExtRound
TripTime
The time interval (measured in milliseconds) between the most recent
Access
-Reply/Access-Challenge and the Access-
Request that matched it
from the RADIUS authentication server.
The granularity of this measurement is 100 ms. A value of 0 ms indicates
that there hasn't been round-trip communication with the server yet.

Lantronix SISPM1040 L3 Series Specifications

General

Brand	Lantronix
Model	SISPM1040 L3 Series
Category	Switch
Language	English