Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 26
Time Zone Configuration
Time Zone: Lists various Time Zones worldwide. Select appropriate Time Zone from
the drop down and click Apply to set. The default is None.
Acronym: You can set the acronym of the time zone. This is a user-configurable
acronym to identify the time zone. The valid range is 0-16 characters (e.g., Pacific – Canada).
Daylight Saving Time Configuration
Daylight Saving Time: This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration. Select 'Disabled' to
disable Daylight Saving Time configuration. Select 'Recurring' and configure the Daylight Saving Time duration to
repeat the configuration every year. Select 'Non-Recurring' and configure the Daylight Saving Time duration for
single time configuration. The default is Disabled.
Recurring Configurations
Start time settings
Week - Select the starting week number.
Day - Select the starting day.
Month - Select the starting month.
Hours - Select the starting hour.
Minutes - Select the starting minute.
End time settings
Week - Select the ending week number.
Day - Select the ending day.
Month - Select the ending month.
Hours - Select the ending hour.
Minutes - Select the ending minute.
Offset settings
Offset - Enter the number of minutes to add during Daylight Saving Time (1 440 minutes)
Non Recurring Configurations
Start time settings
Month - Select the starting month.
Date - Select the starting date.
Year - Select the starting year.
Hours - Select the starting hour.
Minutes - Select the starting minute.
End time settings
Month - Select the ending month.
Date - Select the ending date.
Year - Select the ending year.
Hours - Select the ending hour.
Minutes - Select the ending minute.
Offset settings
Offset - Enter the number of minutes to add during Daylight Saving Time (1-1440 minutes).
To Next Page
Loading...
