Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 289
TLV option select:
Sender Id: Select the default Sender ID TLV format to be used in CCMs generated by this Domain (may be
overridden in service).
None: Do not include Sender ID TLVs.
Chassis: Enable Sender ID TLV and send Chassis ID (MAC Address).
Manage: Enable Sender ID TLV and send Management address (IPv4 Address).
ChassisManage: Enable Sender ID TLV and send both Chassis ID (MAC Address) and Management
Address (IPv4 Address).
Defer: Let the global configuration decide if Sender ID TLVs will be included (may be overridden in
service).
Port Status: Include or exclude Port Status TLV in CCMs generated by this Domain or let higher level determine
(may be overridden in Service).
Disable: Do not include Port Status TLVs.
Enable: Include Port Status TLVs.
Defer: Let the global configuration decide if Port Status TLVs will be included (may be overridden in
Service).
Interface Status: Include or exclude Interface Status TLV in CCMs generated by this Domain or let higher level
determine (may be overridden in Service).
Disable: Do not include Interface Status TLVs.
Enable: Include Interface Status TLVs.
Defer: Let the global configuration decide if Interface Status TLVs will be included (may be overridden in
Service).
Org. Specific: Exclude Organization-Specific TLV in CCMs generated by this Domain or let higher level
determine (may be overridden in Service).
Disable: Do not include Organization-Specific TLVs.
Defer: Let the global configuration decide if Organization-Specific TLVs will be included (may be
overridden in Service).
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page immediately.
Add New Entry: Click to add a new Domain entry.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
