Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 299
Configuration Buttons: You can modify each APS in the table using these buttons:
Edit: Edit the APS row.
Delete: Delete the APS row.
Add: Add a new APS row.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to manually refresh the page immediately.
Apply: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
Messages:
JSON RPC Error. (Invalid hold-off-time. Valid range is [0; 10000] milliseconds in steps of 100 milliseconds)
APS # must be an integer value between 1 and 32
JSON RPC Error. (Working and protect ports cannot use the same interface)
Working Domain must not contain leading digit
Working Domain cannot be empty
Working Service must not contain leading digit
Protecting Domain must not contain leading digit
JSON RPC Error. (Another APS instance is using the same working port interface as this one)
APS Configuration Example: APS # 1, 2, and 3 configured and saved.
To Next Page
Loading...
Need help?
General
