Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 412
Update Timer: The timer interval (in seconds) between the router sends the complete routing table to all
neighboring RIP routers. The allowed range is 5 to 2147483 seconds.
Invalid Timer: The number of seconds after which a route will be marked invalid. The allowed range is 5 to
2147483 seconds.
Garbage Collection Timer: The number of seconds after which a route will be deleted. The allowed range is 5 to
2147483 seconds.
Static Redistribute Mode: Indicates if the router redistributes the static routes into the RIP domain or not.
Enable: Enable static routes redistribution.
Disable: Enable static routes redistribution.
Static Redistribute Metric Value: User specified metric value for the static routes. The field is significant only
when the argument 'StaticRedistIsSpecificMetric' is TRUE. If the specific metric setting is removed while the static
redistributed mode is enabled, the router will update the original static redistributed routes with metric value 16
before updates to the new metric value. The allowed range is 1 to 16.
Auto: The redistributed metric value; refer to redistributed default metric value.
Specific: User specified metric for the static routes.
Connected Redistribute Mode: Indicates if the router redistributes the directly connected routes with RIP not
enabled into the RIP domain or not.
Enable: Enable connected routes redistribution.
Disable: Enable connected routes redistribution.
Connected Redistribute Metric Value: User specified metric value for the connected interfaces. The field is
significant only when the argument 'ConnectedRedistIsSpecificMetric' is TRUE. If the specific metric setting is
removed while the connected redistributed mode is enabled, the router will update the original connected
redistributed routes with metric value 16 before updates to the new metric value. The allowed range is 1 to 16.
Auto: The redistributed metric value; refer to redistributed default metric value.
Specific: User specified metric for the connected routes.
OSPF Redistribute Mode: Indicate if the router redistributes the OSPF routes into the RIP domain or not. The
field is significant only when the OSPF protocol is supported on the device.
Enable: Enable OSPF routes redistribution.
Disable: Enable OSPF routes redistribution.
OSPF Redistribute Metric Value: User specified metric value for the RIP routes. The field is significant only
when the OSPF protocol is supported on the device and argument 'OspfRedistIsSpecificMetric' is TRUE.
If the specific metric setting is removed while OSPF Redistribute mode is enabled, the router will update the
original OSPF redistributed routes with metric value 16 before updates to the new metric value. The allowed
range is 1 to 16.
Auto: The redistributed metric value; refer to redistributed default metric value.
Specific: User specified metric for the OSPF routes.
Redistribute Default Metric Value: The RIP default redistributed metric. It is used when the metric value isn't
specified for the redistributed protocol type. The allowed range is 1 to 16.
Redistribute Default Route: Enable or disable RIP default route redistribution.
Default Passive Mode: Select Enable to set all interfaces as passive-interface by default.
Administrative Distance: The RIP administrative distance. The allowed range is 1 to 255. The default is 120.
To Next Page
Loading...
