Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 425
Quiet (only print result): Checking this option will not print the result of each ping request but will only show the
final result.
After you press the Start button, ICMP packets are transmitted, and the sequence number and round trip time are
displayed upon reception of a reply.
The amount of data received in an IP packet of type ICMP ECHO_REPLY will always be 8 bytes more than the
requested payload data size (the difference is the ICMP header).
The page refreshes automatically until responses to all packets are received, or until a timeout occurs.
The output from the command will look like the following:
PING 172.16.1.1 (172.16.1.1) from 172.16.1.10: 56 data bytes
64 bytes from 172.16.1.1: seq=0 ttl=64 time=2.034 ms
64 bytes from 172.16.1.1: seq=1 ttl=64 time=1.729 ms
64 bytes from 172.16.1.1: seq=2 ttl=64 time=1.954 ms
64 bytes from 172.16.1.1: seq=3 ttl=64 time=1.699 ms
64 bytes from 172.16.1.1: seq=4 ttl=64 time=1.916 ms
--- 172.16.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.699/1.866/2.034 ms
Ping session completed.
Buttons
Start: Starts transmitting ICMP packets, and the sequence number and round trip time are displayed upon
reception of a reply.
New Ping: After a Ping completes, click the button to start a new Ping.
To Next Page
Loading...
Need help?
General
