Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 429
Print Numeric Addresses: By default, the traceroute command will print out hop information using a reverse
DNS lookup for the acquired host IP addresses. This may slow down the display if the DNS information is not
available. Selecting this option will prevent the reverse DNS lookup and force the traceroute command to print
numeric IP addresses instead.
Buttons
Start: Starts transmitting ICMP packets.
New Traceroute: After a traceroute completes, click the button to start a new traceroute.
Example:
To Next Page
Loading...
Need help?
General
