Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 44
Frames Discarded: If a LLDP frame is received on a interface, and the switch's internal table has run full, the
LLDP frame is counted and discarded. This situation is known as "Too Many Neighbors" in the LLDP standard.
LLDP frames require a new entry in the table when the Chassis ID or Remote Port ID is not already contained
within the table. Entries are removed from the table when a given interface's link is down, an LLDP shutdown
frame is received, or when the entry ages out.
TLVs Discarded: Each LLDP frame can contain multiple pieces of information, known as TLVs (TLV is short for
"Type Length Value"). If a TLV is malformed, it is counted and discarded.
TLVs Unrecognized: The number of well-formed TLVs, but with an unknown type value.
Org. Discarded: If LLDP frame is received with an organizationally TLV, but the TLV is not supported the TLV is
discarded and counted.
Age-Outs: Each LLDP frame contains information about how long time the LLDP information is valid (age-out
time). If no new LLDP frame is received within the age out time, the LLDP information is removed, and the Age-
Out counter is incremented.
Buttons
Auto-refresh: Check this box to refresh the page automatically every 3 seconds.
Refresh: Click to refresh the page.
Clear: Clears the counters which have the corresponding checkbox checked.