Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 65
Rx and Tx Org Specific PDU's: A count of the number of Organization Specific OAMPDUs transmitted on this
interface.
Rx and Tx Unsupported Codes: A count of the number of OAMPDUs transmitted on this interface with an
unsupported op-code.
Rx and Tx Link fault PDU's: A count of the number of Link fault PDU's received and transmitted on this interface.
Rx and Tx Dying Gasp: A count of the number of Dying Gasp events received and transmitted on this interface.
Rx and Tx Critical Event PDU's: A count of the number of Critical event PDU's received and transmitted on this
interface.
Buttons
: The port select box determines which port is affected by clicking the buttons.
Auto-refresh: Check this box to enable an automatic refresh every 3 seconds.
Refresh: Click to refresh the page immediately.
Clear: Clears the counters for the selected port.
Messages:
Error while configuring the OAM loopback
To Next Page
Loading...
Need help?
General
