MacDon M205 - Cab Display Module (CDM) and Windrower Control Module (WCM) Fault Codes; Engine Error Codes

214603 156 Revision A
3.19.15 Engine Error Codes
The cab display module (CDM) displays error codes when there is a fault with one of the several sensors that
monitor and control engine operation, to assist the Operator or Technician in locating a specific problem with engine
operation. Refer to 8.4 Engine Error Codes, page 464.
3.19.16 Cab Display Module (CDM) and Windrower Control Module (WCM)
Fault Codes
The CDM displays fault codes when there is a fault with one of the sensors that monitor and control windrower
operation, to assist the Operator or Technician in locating a specific problem with the windrower. Refer to 8.5 Cab
Display Module (CDM) Error Codes, page 478.
OPERATOR’S STATION