MacDon M205 - Header Drive Troubleshooting

214603 430 Revision A
6.4 Header Drive Troubleshooting
Symptom
Problem
Solution Reference
Header drive not
engaging
Header DRIVE switch in cab
not engaged
Engage HEADER DRIVE switch.
Engaging and
Disengaging the
Header, page 204
Header drive not
engaging
Operator Presence switch not
closed or faulty
Occupy operator’s seat or replace
switch. Contact your Dealer.
Contact Dealer
Header drive not
engaging
Appropriate solenoid not
being energized by activating
switch
Contact Dealer. Contact Dealer
Header drive
lacks power
Relief valve setting too low Contact Dealer. Contact Dealer
Header drive
lacks power
Hydraulic couplers/unions not
properly connected
Ensure hoses are connected correctly
and hose couplers/unions are tight.
Refer to the
header operator’s
manual.
Header drive
lacks power
Header drive overload Reduce ground speed.
—
Warning
alarm sounds
Header drive overload Reduce ground speed.
—
Warning
alarm sounds
Relief valve setting too low Contact Dealer. Contact Dealer
TROUBLESHOOTING