214603 447 Revision A
7.3.6 Double Windrow Attachment (DWA)
This kit allows headers to lay a double windrow when installed on a windrower. The kit includes a draper deck,
linkage assembly, hydraulics, and installation instructions.
MD #C1987 consists of:
• MD #B4655 Deck
• MD #B5270 Linkage assembly
• MD #B5301 Hydraulic kit
• Double Windrow Attachment (DWA) manual
7.3.7 Hydraulic Union Kit
Provides a hard plumbing connection to draper/auger headers as an alternative to quick couplers.
MD #166844
Instruction MD #147619 is included in the bundle.
7.3.8 Light Header Flotation
This kit is available for headers that do not require as much spring tension for header float.
MD #B4664
Instruction MD #169033 is included in the bundle.
7.3.9 Quick Coupler Kit
Allows for quick removal of header hydraulics from windrower.
MD #B5497
Instruction MD #169481 is included in the bundle.
7.3.10 Self-Aligning Center-Link
This kit allows the center-link cylinder to be hydraulically positioned and connected to the header without leaving
the operator’s station.
MD #B4802
Instruction MD #169004 included in the bundle.
7.3.11 Swath Compressor
The MacDon Swath Compressor is a large, formed polyethylene sheet which is designed to mount to the underside
of a MacDon M Series Self-Propelled Windrower. When lowered, the swath compressor shapes the windrow and
anchors it into the stubble behind the header using a smooth, gradual transition that helps prevent shelling in ripe
conditions.
Contact your MacDon Dealer for information.
OPTIONS AND ATTACHMENTS
To Next Page
Loading...
