214603 47 Revision A
3.5 Using Seat Belts
The windrower is equipped with seat belts on the operator’s and trainer’s seats.
WARNING
The seat belts can help ensure your safety when properly used and maintained.
• Before starting the engine, fasten your seat belt, and ensure that the training seat occupant’s seat belt
is securely fastened.
• Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted
condition or pinched between the seat structural members.
To fasten seat belt:
Figure 3.14: Seat Belt
1. Pull belt with metal eye (A) at right side completely
across your body.
2. Push metal eye (A) into buckle (B) until it locks.
3. Adjust the position of the belt as low on your body
as possible.
To release seat belt:
4. Push red button (C) in the end of the buckle.
5. Separate buckle (B) and metal eye (A).
OPERATOR’S STATION
To Next Page
Loading...
