MacDon M205 - Specifications

214603 30 Revision A
2.2 Specifications
Engine
Type
Cummins QSB-6.7L 6 cylinder turbo diesel (B20 bio-diesel approved),
control module CM2250
Displacement
6.7 L (409 cu. in.)
Power
Rated
164 kW (220 hp) @ 2200 rpm
Power Peak
172 kW (230 hp) @ 2000 rpm
Bore
107 mm (4.21 in.)
Stroke 124 mm (4.88 in.)
Maximum rpm (no load)
2250–2340
Idle rpm 1075–1150
Electrical System
Battery (2)
12 Volt, maximum dimension – 334 x 188 x 232 mm (13 x 6.81 x 9.43 in.).
Group rating 29H or 31A, heavy duty/off road/vibration resistant
Minimum CCA per battery
(cold cranking amps)
750
Alternator
130 amp
Egress lighting
Standard
Starter
Wet type
Working lights 11
Traction Drive
Type
Hydrostatic, 3-speed electric shift
Speed
Field
(cab-forward)
Low range 0–18 km/h (11 mph), mid range 0–26 km/h (16 mph)
Speed
Reverse
(cab-forward)
9.6 km/h (6 mph)
Speed
Transport
(engine-forward)
High range 0–37 km/h (23 mph)
Transmission Type
2 piston pumps – 1 per drive wheel
Transmission
Displacement
44 cc (2.65 cu. in.)
Transmission
Flow
167 L/min (40 US gpm)
Final drive Type Planetary gearbox
Final drive Ratio
30.06:1
PRODUCT OVERVIEW