Lubricants, Fluids, and System Capacities
CAUTION
To avoid injury or death, do not allow ANY machine fluids to enter the body.
Lubricant/Fluid
Location Description
Capacity
Grease
As required unless
otherwise specified
SAE multi-purpose high temperature
extreme pressure (EP2) performance
with 1% max Molybdenum Disulphide
(NLGI Grade 2) lithium base
—
Diesel fuel
Fuel tank
Grade No.2, or Grade No.1 and 2 mix
69
;
refer to 8.2.2 Fuel Specifications, page
460 for more information
378 liters
(97 US gallons)
Hydraulic oil Hydraulic reservoir
SAE 15W-40 compliant with SAE specs
for API class SJ and CH-4 engine oil.
65 liters
(17.2 US gallons)
Gear lubricant Gearbox
SAE 80W-140
70
, API service class GL-5.
Fully synthetic gear lubricant, (SAE
J2360 preferred)
2.1 liters
(2.2 US quarts)
Gear lubricant
Wheel drive
71
SAE 75W-90, API service class GL-5.
Fully synthetic gear lubricant, (SAE
J2360 preferred)
1.4 liters
(1.5 US quarts)
Antifreeze
Engine cooling
system
ASTM D-6210 and Fleetguard ES
Compleat
®
; refer to 8.2.3 Lubricants,
Fluids, and System Capacities, page 461
Engine oil Engine oil pan
SAE 15W-40 compliant with SAE specs
for API class SJ and engine oil
14.2 liters
(15 US quarts)
Air conditioning
refrigerant
Air conditioning
system
R134A 2.27 kg (5 lb.)
Air conditioning
refrigerant oil
Air conditioning
system total
capacity
PAG SP-15 240 cc (8.1 fl. oz.)
69. Optional when operating temperature is below 0°C (32°F).
70. SAE 75W-140 may be substituted for SAE 80W-140 if necessary.
71. SAE 85W-140 API Service Class GL-5. Extreme Pressure Gear Lubricant is used before initial change.
To Next Page
Loading...
