MacDon M205 - Chapter 7: Options and Attachments; Cab; AM;FM Radio; Automated Steering Systems

214603 443 Revision A
7 Options and Attachments
The following options and attachments are available through your MacDon Dealer. The Dealer will require the part
number (MD #) to determine pricing and availability.
7.1 Cab
7.1.1 AM/FM Radio
The cab is pre-wired for easy installation of a single DIN audio component available from your MacDon Dealer.
Speakers are factory-installed.
In order to retain radio settings and preset memory with the battery disconnect turned off, select a radio with
non-volatile memory.
For installation details, refer to the unloading and assembly instructions supplied with your windrower.
7.1.2 Automated Steering Systems
A MacDon-approved automated steering system is available from MacDon Dealers that provide Trimble
®
GPS
installation and support services.
MacDon windrowers are partially pre-wired for either the Trimble
®
AutoPilot
™
hydraulically integrated steering
system or the Trimble
®
EZ-Pilot
®
wheel/column-based assisted steering system. The windrower’s ground speed
lever (GSL) has an automated steering (autosteer) engage switch and the Trimble
®
display mounting kit
(MD #183348) is supplied in the cab.
The Trimble
®
AutoPilot
™
system requires the MacDon automated steering hydraulic interface kit (MD #B5589).
Installation instruction (MD #169539) is included in the bundle.
Other GPS providers may supply parts in their vehicle-specific installation packages or make installation kits
available through MacDon Dealers.
7.1.3 High Intensity Discharge (HID) Auxiliary Lighting
This kit includes two cab-mounted high intensity discharge (HID) lamps that provide additional field lighting.
MD #B5596
Instruction MD #169621 is included in the bundle.
7.1.4 Lighting and Marking for Cab-Forward Road Travel
This kit allows the windrower to be compliant with vehicle lighting regulations when travelling in the cab-forward
mode on public roads. The kit includes red taillights, slow moving vehicle (SMV) markings, hardware, and
installation instructions.
MD #B5412
Instruction MD #169426 is included in the bundle.
7.1.5 Pressure Sensor Kit
This kit provides enhanced monitoring of the knife drive (or reel drive) hydraulic pressure, and warns of overload
conditions.
MD #B5574
Instruction MD #169031 is included in the bundle.