MacDon M205 - Definitions

214603 27 Revision A
2 Product Overview
2.1 Definitions
The following terms and acronyms may be used in this manual.
Term
Definition
A Series header
MacDon A30D and A40D auger headers
API American Petroleum Institute
ASTM American Society of Testing and Materials
Bolt
A headed and externally threaded fastener that is designed to be paired with a nut
Cab-forward Windrower operation with Operator and cab facing in direction of travel
CDM Cab display module on a windrower
Center-link
A hydraulic cylinder link between header and machine used to change header angle
CGVW Combined gross vehicle weight
D Series header
MacDon D50, D60, and D65 rigid draper headers
D1 SP Series header
MacDon D115, D120, D125, D130, D135, or D140 rigid draper headers for M Series
Windrower
DK
Double knife
DKD
Double-knife drive
DDD Double-draper drive
DWA Double Windrow Attachment
ECM
Engine control module
Engine-forward Windrower operation with Operator and engine facing in direction of travel
FFFT
Flats from finger tight
Finger tight
Finger tight is a reference position where sealing surfaces or components are
making contact with each other, and fitting has been tightened to a point where
fitting is no longer loose
GSL Ground speed lever
GSS Grass Seed
GVW Gross vehicle weight
Hard joint
A joint made with use of a fastener where joining materials are highly
incompressible
Header A machine that cuts and lays crop into a windrow and is attached to a windrower
Hex key
A tool of hexagonal cross-section used to drive bolts and screws that have a
hexagonal socket in head (internal-wrenching hexagon drive); also known as an
Allen key and various other synonyms
HDS Hydraulic deck shift
hp Horsepower