MacDon M205 - Filter Part Numbers

214603 462 Revision A
NOTE:
If Fleetguard ES Compleat
®
is unavailable, use a coolant concentrate or prediluted coolant intended for use with
heavy duty diesel engines and meet a minimum of the following chemical and physical properties:
• Provides cylinder cavitation protection according to fleet study run at or above 60% load capacity.
• Protects the cooling system metals (cast iron, aluminum alloys, and copper alloys such as brass) from
corrosion.
The additive package must be part of one of the following coolant mixtures:
• Ethylene glycol or propylene glycol base prediluted (40–60%) heavy duty coolant.
• Ethylene glycol or propylene glycol base heavy duty coolant concentrate in a 40–60% mixture of concentrate
with quality water.
Water quality is important to the performance of the cooling system. Distilled, deionized, or demineralized water is
recommended for mixing with ethylene glycol and propylene glycol base engine coolant concentrate.
IMPORTANT:
Do NOT use cooling system sealing additives or antifreeze that contains sealing additives.
8.2.4 Filter Part Numbers
Table 8.17 M205 Filter Part Numbers
Filter Part Number
Engine oil filter MD #111974
Charge oil filter MD #112419
Return oil filter MD #112419
Lift oil filter MD #112419
Primary fuel filter element MD #111972
Secondary fuel filter element MD #166312
Fuel strainer filter (breather) MD #111608
Fuel filler filter MD #163989
Primary element (cab) MD #111060
Primary air filter element MD #138685
Secondary air filter element MD #139077
Return air filter MD #109797
REFERENCE