NEC UX5000 - Page 181

Instruction Menu
UX Mail Manual Chapter 2: Features ◆ 163
2
Programming
Step 1 To turn off the default Instruction Menu (and Welcome Message):
1.1 CUSTOMIZE: MAILBOX OPTIONS EDIT: CALL ROUTING: [CALL HANDLING] PLAY DEFAULT MESSAGES
(PAGE 360).
- Use this option to enable (Yes) or disable (No) the default Instruction Menu and Welcome
Message for a Call Routing Mailbox.
-If enabled and the Instruction Menu and Welcome Message are not recorded, an Auto-
mated Attendant caller hears the default recordings.
-If disabled and the Instruction Menu and Welcome Message are not recorded, the caller
hears silence.
✔ By default, this option is disabled (No).
Operation
Recording an Instruction Menu Message for a Call Routing Mailbox
(If you don’t see a Soft Key, press More> until it appears.)
Log onto System Administrator’s mailbox (301).
[Admin]
Access the System Administrator options.
• Alternately dial
SA (72).
[Annc]
Select the Instruction Menu Message options.
• Alternately dial
I (4).
Enter the Call Routing Mailbox number.
[Lstn]
Listen to current Instruction Menu Message.
• Alternately dial
L (5).
[Pause]
Pause listening.
• Alternately dial *.
[Resume]
Resume listening.
• Alternately dial *.
[Erase]
Erase the currently recorded message.
• Alternately dial
E (3).
[Exit]
Exit the listen mode.
• Alternately dial
#.
N/A
Backup a few seconds.
•Dial
B (2).
N/A
Backup to beginning.
•Dial
BB (22).
N/A
Go forward.
•Dial
G (4).
N/A
Turn volume up.
•Dial
VU (88).
N/A
Turn volume down.
•Dial
VD (83).
N/A
Return volume to normal.
•Dial
VN (86).