Log Onto Voice Mail
UX Mail Manual Chapter 2: Features ◆ 179
2
Operation
Logging Onto Your Mailbox
To log onto your Subscriber Mailbox:
1.
Press your Voice Mail key.
■ From an on-premise single line set, lift handset and dial *8.
To log onto your Guest or Message Center Mailbox, or your Subscriber Mailbox from a co-worker’s
extension:
1.
Press an idle CALL key.
2. Dial the voice mail master number (e.g., 700).
3. Dial your mailbox number.
To log onto your Subscriber, Guest, or Message Center Mailbox from the Automated Attendant:
1.
Wait for the Automated Attendant to answer.
2. Dial # and your mailbox number.
■ This option may be different in your system. Check with your Communications Manager,
If you call your Direct Inward Line and voice mail picks up the call:
1.
Dial # to log onto your mailbox (instead of leaving a message).
■ This lets you dial your own number and then use the features of your mailbox.
To Next Page
Loading...
